Computer Accessories, Peripherals & Office Products - Trustpick

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

USB 3.0 To Dual HDMI, USB, USB-C / Type-C High Definition Converter 4K USB Same Screen Extender, USB 3.0 To Dual HDMI

Trustpick

USB 3.0 To Dual HDMI, USB, USB-C / Type-C High Definition Converter 4K USB Same Screen Extender, USB 3.0 To Dual HDMI

Rs. 1,700.00 INR

In stock

Receives in 7 days.

10Gbps USB3.1 Type-C Female to USB3.0 Male Adapter Convertor with Chip

Trustpick

10Gbps USB3.1 Type-C Female to USB3.0 Male Adapter Convertor with Chip

Rs. 200.00 INR

In stock

Receives in 7 days.

DTECH DT-5119 0.5m USB To RS485/422 Industrial Converter Serial Line Communication Adapter, DT-5119 0.5m

DTECH

DTECH DT-5119 0.5m USB To RS485/422 Industrial Converter Serial Line Communication Adapter, DT-5119 0.5m

Rs. 2,000.00 INR

1. Compatible standards: The interface is compatible with EIA/TIA RS-485 and RS-422 standards
2. Material: ABS
3. Wire structure: 24WG wire, 80 braided tinned copper braid + aluminum foil double shielding + four tensile rope + 7 cores + 8mm thick wire body, fully shielded environment
4. Chip: FTDI-FT232RL+sp485 dual chip
5. Working mode: asynchronous half-duplex communication, asynchronous full-duplex communication
6. USB signal: VCC, DATA+, DATA-, GND
7. RS-485/RS-422/DB9 pin signal: T/R+, T/R-, GND
8. Signal indication: red light for power supply, green light for sending signal, yellow light for receiving signal
9. Communication rate: 300bps-460800bps, automatic detection of serial port signal rate
10. Communication distance: about 0-5 meters at the USB end; about 0-1200 meters at the RS-485/RS-422 end
11. Number of connectable nodes: support RS-485/RS-422 terminal 32 nodes
12. Communication mode: RS-485 point-to-point half-duplex communication, RS-485 point-to-multipoint half-duplex communication, RS-422 point-to-point full-duplex communication, RS-422 point-to-multipoint full-duplex communication
13. Protection level: about 15kV IEC1000-4-2 Air Discharge
14. Lightning protection and surge protection: 600W lightning surge protection
15. Wiring method: terminal equipment can be connected by twisted pair or shielded wire
16. Transmission medium: twisted pair or shielded wire
17. Support system: Windows10/8/8.1/7, Server 2008, XP, Vista, Mac OS8/9, OS-X, Linux2.4 and other systems
18. Power supply mode: USB power supply
19. Voltage range: 5V
20. Working current: less than 300mA
21. Application scenarios: industrial automation control system, access control system, power control system, parking lot system, attendance machine, industrial computer, PLC controller, etc.
22. Weight: about 70g
23. Length: about 0.5m

Features:
1. Built-in FTDI-FT232RL+SP485 dual-chip, high-speed logic processing chip, TVS insurance diode, support RS485/422 protocol equipment long-distance transmission, stable and durable
2. 32 RS485/422 devices can be connected, the data communication baud rate range is about 300bps-460800bps
3. Wide range of applications, suitable for connection between computers and various RS485/422 devices, two-way interactive data transmission
4. Automatically control the direction of data flow through the I/O circuit, and automatically determine and control the direction of data transmission
5. Built-in zero-delay automatic transceiver conversion, automatic detection of serial port signal rate
6. Multi-system compatibility, support Windows10/8/8.1/7, Server 2008, XP, Vista, Mac OS8/9, OS-X, Linux2.4 and other systems
7. Safety lightning protection, surge protection
8. Built-in 3 kinds of data indicators, easy to check the working status
9. Use 24WG thick 80 braided tinned copper core, tightly shielded inside and outside, to strengthen anti-electromagnetic interference

Specification:

Package Weight

One Package Weight

0.20kgs / 0.45lb

One Package Size

20cm * 15cm * 3cm / 7.87inch * 5.91inch * 1.18inch

Qty per Carton

146

Carton Weight

30.00kgs / 66.14lb

Carton Size

50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch

Loading Container

20GP: 177 cartons * 146 pcs = 25842 pcs
40HQ: 412 cartons * 146 pcs = 60152 pcs

In stock

Receives in 7 days.

T10 USB3.1 To SATA Easy Drive Cable Hard Drive Adapter Cable

Trustpick

T10 USB3.1 To SATA Easy Drive Cable Hard Drive Adapter Cable

Rs. 600.00 INR

In stock

Receives in 7 days.

3pcs USB Double Female Straight-through Head USB Double Female Interface

Trustpick

3pcs USB Double Female Straight-through Head USB Double Female Interface

Rs. 200.00 INR

In stock

Receives in 7 days.

Motherboard 20pin Turn Double USB3.0 Extension Cable with Ear Baffle Cable, Blue

Trustpick

Motherboard 20pin Turn Double USB3.0 Extension Cable with Ear Baffle Cable, Blue

Rs. 400.00 INR

In stock

Receives in 7 days.

USB C to Magnetic Mag-Safe Adapter,Mag-Safe to Type C Charging Converter Adapter Compatible for MacBook Pro/Air,Nintendo Switch,Phone and Other USB C Devices, Compatible

Trustpick

USB C to Magnetic Mag-Safe Adapter,Mag-Safe to Type C Charging Converter Adapter Compatible for MacBook Pro/Air,Nintendo Switch,Phone and Other USB C Devices, Compatible

Rs. 1,800.00 INR

USB C to Magnetic Mag-Safe Adapter,Mag-Safe to Type C Charging Converter Adapter Compatible for MacBook Pro/Air,Nintendo Switch,Phone and Other USB C Devices, Compatible

The USB C to Magsafe Fast Charge Adapter solves the charging conversion problem of the new laptop C-port, allowing the old Mag Safe charger to be converted to a Type-C interface for charging your new Mac Book Pro quickly and easily.
Use the USB C to Magsafe charger adapter with magnetics to make it easier to charge and disconnect the device. When an external force pulls the charging cable, the magnetic interface will automatically fall off and disconnect the power supply, avoiding the risk of directly inserting the Type-C charging cable to drag or damage the computer and other devices.
This Magsafe to USB C adapter supports 45W / 60W / 85W Magsafe 1 or Magsafe 2 chargers without the need for an additional adapter. Support for a variety of devices with a USB C charging interface.
Built-in overcurrent protection and overvoltage protection unit to prevent overheating and overcharging of equipment. Prevent damage to the USB C to Magsafe adapter.
The good-looking appearance and compact and lightweight design do not take up too much space and weight in the bag. You can carry and use it anytime, anywhere, making it easier for you to travel.

Product description
1. Function and use
This is an adapter designed for the new MacBook Pro. With this USB C to MagSafe adapters, you can charge your new MacBook Pro with the old Magsafe charger. It not only supports new MacBook Pro devices, but also supports other devices with a USB C interface.
The lightweight design allows you to carry and use it anytime, anywhere. The magnetic Magsafe interface will be more convenient to use. You can connect the device and disconnect the power supply at any time to prevent damage to the device caused by accidental pulls of the charging cable.

2. Product parameters and compatibility
Input: 85W / 60W / 45W Mag Safe 1 or Mag Safe 2 power adapter.
Output: 60 C / 45W / 29W USB C device charging
For Mac Book Pro 2016 / 2017/2018 and other USB C laptops, C-type phones and Nintendo Switch, game consoles/tablets with USB C interface.

3. How to use
a. Connect the power brick to the AC power source and connect the original Mag Safe charger connector to this Mag Safe port.
b. Connect this USB C connector to a USB C device. Here, the signal light will not light, but it will not affect the charging effect.

4. Notes
a. Different connectors will have different power outputs, and the speed of charging depends on the power of the charger. However, the maximum output power of this USB C to MagSafe converter is 60W.
b. The LED in the MagSafe adapter will not light up when charging, but it will not affect the use.
c. This USB C to Magsafe adapter may generate some heat when charging, just like your original magsafe charger, it will not affect the use.
About the product

Power Wattage : USB C Output supports 20V / 3A, 14.5V / 3.25A, 14.5V / 2A, 9V / 2A and 5V / 2.4A, help you charge very fast. And is compatible with both MagSafe 1 & MagSafe 2 in one device while other adapters are usually compatible with MagSafe 2 only. Adapter is made specifically for your Apple MacBook / Pro to powered equipment.
MagSafe Adapter : Reuse your old charger with your new USB C Devices. The replacement and extender adapter.
High-Grade Technology : Manufactured with the highest quality materials and include built-in multi-protect system supports over-charged, over-discharged, over-voltage, over-current and short circuit protection.
Magnetic Connection : USB C male to MagSafe adapter. Convert USB C to 5Pin magsafe connector. Itâs held in place magnetically, so if someone should trip over it, the cord disconnects harmlessly and your notebook stays put safely.

Feature:
Double sides of adapter can be plugged into your devices, so you donât have to spend time on distinguishing which side you should plug in.

How to connect:
1. Connect the power brick to AC source, and then connect USB C charger connector to this USB C port.
2.Connect this MagSafe connector to your MacBook. Here, the signal light wonât turn on, but it will not affect the charging effort.
3. The signal will be connected about 20 seconds.

Important Note:
The maximum output is 45W when you connected the MagSafe 1&2 adapter if you use MacBook old 45W and 60W adapter to charge, and for the 85W adapter, the output power is 60W.

Noted:
Please allow 0-1CM differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item
Type C Combo Hub only, other accessories demo in the picture is NOT included

Specification:

Package Weight

One Package Weight

0.06kgs / 0.13lb

One Package Size

15cm * 5cm * 3cm / 5.91inch * 1.97inch * 1.18inch

Qty per Carton

100

Carton Weight

4.80kgs / 10.58lb

Carton Size

20cm * 30cm * 30cm / 7.87inch * 11.81inch * 11.81inch